Le caratteristiche più importanti (ENG):
- Wide Test Frequency 10Hz ~ 30MHz/20MHz/10MHz/5MHz
- 7” LCD color Display
- 0.08% Basic Accuracy
- Displaying Four Measurement results simultaneously from 17 selectable measurement parameters freely
- 15 steps List Measurement
- Two Curves Sweep Mode
- Internal DC Bias Voltage ±12V
- USB Storage available
- ALC function available
- Standard Interfaces : RS-232C, USB host/device, LAN, GPIB and Handler
- Universal power input

Le caratteristiche più importanti:
- 3.5’ TFT LCD (320x240)
- Elementi di misura: Tensione continua e resistenza AC
- Misurazione delle tensione: 300V (GBM-3300) o 80V (GBM-3080)
- Misura della resistenza: 0mΩ~ 3.2kΩ (max.)
- Precisione di base per la misurazione della tensione: 0.01%
- Precisione di base per la misurazione della resistenza: 0.5%
- Misurazione della risolzione fino a 0.1μΩ e 10μV, adatta per la misurazione a cella singola
- Funzione GO/NOGO indipendente per tensione e resistenza

Le caratteristiche più importanti (ENG):
- 7 Operating Modes: CC, CV, CR, CP, CC+CV, CR+CV, CP+CV
- Fast/ Normal Sequence Function
- Soft Start
- Battery discharge test
- OCP、OPP test Automation
- Max. Slew Rate: 2.5A/us
- Dynamic mode
- Protection: OVP, OCP, OPP, OTP, RVP, UVP
- Remote Sense
- Integrate voltage, current and power measurement functions

Le caratteristiche più importanti (ENG):
- 20 Hz - 10 MHz/5 MHz/1 MHz
- Large LCD display
- 6 digit measurement resolution
- 0,1% basic measurement accuracy
- Multiple step mode
- DC resistance measurement
- Comprehensive measurement functions
- Monitoring of DUT voltage and current
- Pass/fail Test
- Standard interface: RS-232 & GPIB
- Graph mode

Le caratteristiche più importanti (ENG):
- 3.5” color LCD
- 5 models (10Hz~2kHz/20kHz/100kHz/200kHz/300kHz)
- Consecutive test frequency
- Basic accuracy : 0.05%
- Measuring speed up to 25ms (max.)
- Full frequency range or spot OPEN/SHORT
- DCR measurement and internal D.C. bias voltage (±2.5V)
- PASS/FAIL judgment
- Auto Level Control (ALC) function
- BIN function provides 9BIN and 1AUX, totally 10 BIN
- Standard interface : RS-232C, Handler and USB storage

Le caratteristiche più importanti (ENG):
- 50,000 counts
- 3.5” (320 x 240) TFT LCD display
- High accuracy of 0.05% precision
- 1Amp test current, 1µΩ resolution
- Fast measurement of 60 readings per second
- Four wire resistance measurement
- Temperature compensation measurement function
- Delayed measurement
- 20 sets of panel setting memory
- Dry circuit (GOM-805 only)
- Interface: USB device, RS-232C, Handler/Scan/EXT I/O, and GPIB (option)

Le caratteristiche più importanti:
- Omologato per elettromedicali (IEC 60601-1) e general purpose (IEC 60990)
- 8 diversi tipi di test
- Display TFT LCD touch
- 50 tipi di test precaricati + 30 memorizzabili dall’utente
- Test Pass/Fail
- Modalità di funzionamento in DC, AC, AC + DC e AC Peak
- Interfaccia RS-232, GPIB e USB

Le caratteristiche più importanti (ENG):
- Sequence function to do high Efficient load simulations
- Flexible configuration with mainframes and plug-in modules
- Multiple independent load inputs up to 8 channels in a mainframe
- Parallel connection of inputs for increased load capacity
- Parallel connection of inputs for static and dynamic tests
- OPP/OCP/OVP/OTP protections
- External channel control/monitoring via an analog control connector
- Multi-Interface USB Device / Host, RS-232C, and GPIB (Optional)