| MANUFACTURER |
MODEL |
DESCRIPTION |
| ANRITSU |
35WRD180K |
WRD180 x 2.92mm male Adapter |
| BOONTON |
51972 |
WRD180 Power Sensor, -50 to +10 dBm, 18-40 GHz,for Boonton meter |
| CMT |
10109781-10 |
WRD180 x 2.92mm(f) Adapter, 1-1/2 inch dia. Bulkhead mounting |
| CMT |
DBCC180-10 |
WRD180 Directional Coupler, 10 dB coupling, 2.92mm(f) coupled port |
| CMT |
DRS180-1C1C-4.0 |
WRD180 Straight Section, 4 inches length |
| CMT |
DRT180-1C1C-90-4 |
WRD180 90 degree Left Hand Twist Section, 4 inches length |
| GENERIC |
WRD180 10 dB ATT. |
WRD180 10 dB Attenuator, 2.5 inches length, brass |
| HONEYWELL |
FK/Ka-UT |
WRD180 Mixer,RF/LO=18-40 GHz,LO=+3dBm,amplified IF=1-600MHz,15V |
| MAST MICROWAVE |
LD-18500 |
WRD180 Low Power Termination, 6 inches length |
| MAST MICROWAVE |
WB-11850 |
WRD180 90 degree E-Plane Bend |
| MAST MICROWAVE |
WB-12850 |
WRD180 90 degree H-Plane Bend |
| MAST MICROWAVE |
WT-10850 |
WRD180 90 degree Twist Section |
| MICROWAVE ENG. |
R135 |
WRD180 90 degree H-Plane Bend |
| MICROWAVE ENG. |
R15-15.75-C1C1 |
WRD180 Straight Section, 15-3/4 inches length |
| MICROWAVE ENG. |
R15-16.25-C1C1 |
WRD180 Straight Section, 16-1/4 inches length |
| MICROWAVE ENG. |
R15-24-C1C1 |
WRD180 Straight Section, 24 inches length |
| MICROWAVE ENG. |
R165-3 |
WRD180 Directional Coupler. 3 dB coupling |
| MICROWAVE ENG. |
R165-3K |
WRD180 Directional Coupler, 3 dB coupling,2.92mm(f) coupled port |
| MICROWAVE ENG. |
R165-6K |
WRD180 Directional Coupler, 6 dB coupling,2.92mm(f) coupled port |
| MICROWAVE ENG. |
R45-K |
WRD180 x 2.92mm(f) Adapter |
| MICROWAVE ENG. |
R85-215 |
WRD180 High Power Load, 300 Watts average, with -30 dB 2.92mm(f) sample port |
| MICROWAVE ENG. |
RE45-K |
WRD180 x 2.92mm(f) End Launch Adapter |
| QUINSTAR |
QWH-180-PRS |
WRD180 Horn Antenna, 24 dBi gain mid-band |
| WAVEGUIDE ENG. |
WRD180-028A |
WRD180 x WR28 Taper Section, 2-1/2 inches length, aluminum |
| WILTRON |
SC3564 |
WRD180 x 2.92mm(f) Adapter, 1-1/2 inch dia. bulkhead mounting |
