| MANUFACTURER |
MODEL |
DESCRIPTION |
| 3 dBm |
10182292-1 |
CPR90 Level Set Attenuator, 0-25 dB, uncalibrated drive |
| A.E.L. |
F2001 |
WR90 Low Pass Filter, 8.2-12.4 GHz passband,-30 dB at 14.7 GHz, -60 dB at 16.5 GHz, 5.35 inches length |
| AERTECH |
AWI8012-2 |
WR90 Isoadapter, 20 dB isolation, 8.2-12.4 GHz,SMAf in/ WR90 out |
| AERTECH |
W812BR |
WR90 Tunnel Diode Detector, positive polarity, 8.2-12.4 GHz |
| AMERICAN ELEC. LAB. |
H-6000 |
WR90 Left Hand Circular Polaized Horn Antenna, 10-12 dBi gain, 8.2-12.4 GHz, with dust cover |
| AMPHENOL |
131-1202 |
WR90 x APC7 Adapter |
| ANDREW |
55437-90 |
CPR90 (grooved ) x CMR90 Adapter, 4 inches length*NEW* |
| ANDREW |
59210-90 |
WR90 x N(f) Adapter |
| ANDREW |
H090MC091C091SG |
CPR90 (grooved flanges) 90 degree H-Plane Bend, brass |
| ANRITSU |
23UA100 24UA100 |
WR90/CPR90 1/8 wavelength & 3/8 wavelength Offset Short pair |
| ANRITSU |
23UA90 |
CPR90/WR90 1/8 wavelength (4.89mm) Offset Short |
| ANRITSU |
24UM100 |
WR90/CPR90 3/8 wavelength Offset Short |
| ARRA |
90-462 |
WR90 x SMA(f) Adapter |
| ARRA |
90-463 |
WR90 x APC7 Adapter |
| ARRA |
AW1829B |
CPR90 Directional Coupler, 10 dB coupling, N(f) coupled arm |
| ARRA |
X600-20 |
WR90 4-Port Crossguide Coupler, 20 dB coupling |
| ARRA |
X820 |
WR90 Standard Gain Horn, 20 dBi gain mid-band |
| ATM |
90-201B-2 |
CPR90 x SMA(f) End Launch Adapter |
| ATM |
90-253-2 |
CPR90 x N(f) Adapter |
| BENDIX |
4000525-1212 |
WR90 12 inch diameter Slot Antenna Array: 4 rows of 12 slots; 4 rows of 10 slots, 2 rows of 8 slots, 2 rows of 4 slots |
| BENDIX |
WXA-006 |
WR90 Loop Coupler, 16-18 dB coupling, N(f) coupled port, 1 inch insertion length |
| BENDIX |
WXA-007 |
WR90 Loop Coupler, 30 dB coupling to SMA(f), 1 inch insertion |
| BOGART |
DA-146/U |
WR90 High Power Load, 500 Watts average/ 290 kW peak |
| CASCADE RESEARCH |
HF-8089 |
WR90 Isolator, 25 dB, 8.2-12.4 GHz, 10 Watts maximum |
| CASCADE RESEARCH |
X-12-25 |
WR90 Isolator, 40 dB isolation, 8.2-12.4 GHz, 20 Watts maximum |
| CASWELL ELEC. |
X-101-H |
WR90 Isolator, 40 dB, 8.2-12.4 GHz |
| CMT |
RBCC90SMAF20 |
WR90 Directional Coupler, 20 dB coupling, SMA(f) coupled port |
| COLEMAN MICROWAVE |
400200 |
WR90 Band Pass Filter, 14 section, 9.30-9.93 GHz, 13 inches length, silver/brass |
| COMMSCOPE |
C090-CNSG |
CPR90 (grooved flange) x N(f) Adapter |
| CONNECTICUT MICROWAVE |
334031 |
WR90 Sampling Coupler, 60 dB, 9.2-9.5 GHz, SMA(f) coupled port, 2.62 inch length, aluminum |
| DEMORNAY BONARDI |
DBD-460 |
WR90 High Power Load, 500 Watts average/ 300 kW peak |
| DEMORNAY BONARDI |
DBG-274-6 |
WR90 90 degree Twist Section, 6 inches length, cover/choke flanges |
| DEMORNAY BONARDI |
DBG-313 |
WR90 Tunable Detector |
| DEMORNAY BONARDI |
DBG-460 |
WR90 High Power Load, 600 Watts average |
| DEMORNAY BONARDI |
DBG-620 |
WR90 H-Plane (Shunt) Tee |
| DEMORNAY BONARDI |
DBG-650 |
WR90 Hybrid Tee |
| DEMORNAY BONARDI |
DBG-710-3 |
WR90 Direct Reading Freq. Meter, transmission type, 0.08% acc. |
| DEMORNAY BONARDI |
DBGX-436 |
WR90 Assymetrical Mitre H-Plane Bend, 1.75" x 3.25" leg lengths, cover/choke flanges |
| DEMORNAY BONARDI |
DBG-X-487-1 |
WR90 Directional Coupler, 10 dB, 8.8-9.8 GHz, 5-1/4 inch length |
| DEMORNAY BONARDI |
DBG-X-487-2 |
WR90 Dir. Cplr., 10 dB, 8.8-9.8 GHz, SMA(f) thru-line output |
| DEMORNAY BONARDI |
DBG-X-487-3 |
WR90 Dir. Cplr., 10 dB, 8.8-9.8 GHz, SMA(f) coupled port output |
| DIAMOND ANTENNA |
3-830 |
WR90 Directional Coupler, 3 dB coupling |
| E&M LABS |
X983LI |
WR90 Isolator, 30 dB, 8.2-12.4 GHz, 20 Watts average power max. |
| E&M LABS |
X983LI |
WR90 Isolator, 25 dB, 8.2-12.4 GHz, 10n Watts maximum |
| FERROCOM |
9052-SFO |
WR90 Isoadapter, 20 dB, 8.2-12.4 GHz, WR90 in/ SMA(f) out |
| FLANN MICROWAVE |
16131-AD |
WR90 4-Port Unterminated Broadwall Coupler, 3 dB coupling, SMA(f) coupled ports, 30 dB directivity with Weinschel M1406A SMA termination (included) |
| FREQUENCY ENGINEERING LABS |
K-105319301 |
WR90 Standard Gain Horn, 15 dBi gain mid-band |
| FXR/MICROLAB |
X155AS |
WR90 Direct Reading Variable Attenuator, 0-20 dB |
| FXR/MICROLAB |
X157A |
WR90 Isolator, 30 dB, 8.2-12.4 GHz, 10 watts maximum |
| FXR/MICROLAB |
X410B |
WR90 Direct Reading Frequency Meter, 0.08% accuracy |
| FXR/MICROLAB |
X411A |
WR90 Direct Reading Frequency Meter, 0.08% accuracy |
| FXR/MICROLAB |
X510D |
WR90 Standard Mismatch, 1.20 VSWR |
| FXR/MICROLAB |
X510E |
WR90 Standard Mismatch, 1.50 VSWR |
| FXR/MICROLAB |
X610B |
WR90 Directional Coupler, 6 dB coupling |
| FXR/MICROLAB |
X610C |
WR90 Directional Coupler, 10 dB coupling |
| FXR/MICROLAB |
X612D |
WR90 4-Port Crossguide Coupler, 20 dB coupling |
| FXR/MICROLAB |
X620A |
WR90 Series (E-Plane) Tee |
| FXR/MICROLAB |
X623B |
WR90 90 degree E-Plane Bend |
| FXR/MICROLAB |
X624B |
WR90 90 degree H-Plane Bend |
| FXR/MICROLAB |
X630C |
WR90 Adjustable Short, micrometer drive |
| FXR/MICROLAB |
X634A-12 |
WR90 Straight Section, 12 inches length |
| FXR/MICROLAB |
X641A |
WR90 DPDT Transfer Switch, manually operated |
| GABRIEL |
CPR90G 36" FLEX |
CPR90 (grooved flanges) 36 inch Flexible Waveguide Section |
| GENE MACHINE |
0281203 |
WR90 choke flange to WR90 choke flange Bulhead Adapter, 2.25 x 2.25 x 0.62 inches |
| GENERAL DYNAMICS |
16U2092-5 |
WR90 High Power Load, 700 Watts average, 115VAC fan cooled |
| GENERAL MICROWAVE |
X411 |
WR90 Tunable Detector |
| GENERIC |
CMR90 x WR90 |
CMR90 to WR90 (UG39/U) Flange Adapter, 2 inches length, silver / brass |
| GENERIC |
WR90 Bulkhead |
WR90 Bulkhead Mount, 0.5 inch thickness X 2.6 inch diameter, 4 hole mount, brass |
| GENERIC |
WR90 magic tee |
WR90 Matched Hybrid Tee, 2.3 inch insertion length, brass |
| GENERIC |
WR90 sidewall |
WR90 Short Body Sidewall Dir.Coupler, 20 dB, 8.2-10.6 GHz, 9 in. |
| GENERIC |
WR90 SS Tuner |
WR90 Short Body Slide Screw Tuner, 2-3/4 inches length,stainless |
| HP/KEYSIGHT |
11521A |
WR90 Single Ended Mixer |
| HP/KEYSIGHT |
8735A |
WR90 PIN Modulator, 35 dB isolation, <4 dB ins.loss, 30 nS Tr |
| HP/KEYSIGHT |
8735B |
WR90 PIN Modulator, 80 dB isolation, <5 dB ins.loss, 30 nS Tr |
| HP/KEYSIGHT |
X281A |
WR90 x N(f) Adapter, VSWR 1.25 |
| HP/KEYSIGHT |
X281B |
WR90 x APC7 Adapter, VSWR 1.25 |
| HP/KEYSIGHT |
X281B-013 |
WR90 x N(f) Adapter |
| HP/KEYSIGHT |
X281C |
WR90 x APC7 Adapter, VSWR 1.05 |
| HP/KEYSIGHT |
X281C-012 |
WR90 x N(m) Adapter, VSWR 1.05 |
| HP/KEYSIGHT |
X281C-013 |
WR90 x N(f) Adapter, VSWR 1.05 |
| HP/KEYSIGHT |
X362A |
WR90 Low Pass Filter, 16 GHz (-30 dB) cutoff |
| HP/KEYSIGHT |
X370A |
WR90 Fixed Attenuator, 3 dB, 1 Watt maximum |
| HP/KEYSIGHT |
X372C |
WR90 Precision Fixed Attenuator, 10 dB |
| HP/KEYSIGHT |
X375A |
WR90 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. |
| HP/KEYSIGHT |
X382A |
WR90 Precision Direct Reading Attenuator, 0-50 dB |
| HP/KEYSIGHT |
X421A |
WR90 Crystal Detector, negative polarity |
| HP/KEYSIGHT |
X424A |
WR90 Crystal Detector, negative polarity |
| HP/KEYSIGHT |
X424A-002 |
WR90 Crystal Detector, neg. pol., with matched load |
| HP/KEYSIGHT |
X424A-K12 |
WR90 Planar Doped Barrier Diode Detector, negative polarity |
| HP/KEYSIGHT |
X485B |
WR90 Tunable Detector Mount, neg. polarity, uncalibrated drive |
| HP/KEYSIGHT |
X486A |
WR90 Thermistor Mount, for HP 432 series power meters |
| HP/KEYSIGHT |
X530A |
WR90 Calibrated Tuned Cavity Freq. Meter, 0.1% accuracy |
| HP/KEYSIGHT |
X532B |
WR90 Direct Reading Frequency Meter, 0.08% accuracy |
| HP/KEYSIGHT |
X750D |
WR90 4-Port Crossguide Coupler, 20 dB coupling |
| HP/KEYSIGHT |
X750E |
WR90 4-Port Crossguide Coupler, 30 dB coupling |
| HP/KEYSIGHT |
X752A |
WR90 Directional Coupler, 3 dB coupling |
| HP/KEYSIGHT |
X752C |
WR90 Directional Coupler, 10 dB coupling |
| HP/KEYSIGHT |
X752C(CMR) |
CMR90 Directional Coupler, 10 dB coupling |
| HP/KEYSIGHT |
X752D |
WR90 Directional Coupler, 20 dB coupling |
| HP/KEYSIGHT |
X840A |
WR90 Series (E-Plane) Tee |
| HP/KEYSIGHT |
X870A |
WR90 Slide Screw Tuner, vernier read |
| HP/KEYSIGHT |
X880A |
WR90 E-H Plane Tuner, uncalibrated drives |
| HP/KEYSIGHT |
X885A |
WR90 Direct Reading Phase Shifter, 0-360 degrees |
| HP/KEYSIGHT |
X910B |
WR90 Termination, 1/2 Watt, 1.015 VSWR |
| HP/KEYSIGHT |
X912A |
WR90 Medium Power Load, 50 Watts sverage/ 50 kW peak |
| HP/KEYSIGHT |
X914A |
WR90 Moving Load |
| HP/KEYSIGHT |
X914B |
WR90 Moving Load, 1 Watt, SWR=1.01 |
| HP/KEYSIGHT |
X916B |
WR90 Standard Reflection, 1.11 VSWR / .05 reflection coefficient |
| HP/KEYSIGHT |
X916D |
WR90 Standard Reflection, 1.35 VSWR/ .15 reflection coefficient |
| HP/KEYSIGHT |
X920A |
WR90 Adjustable Short, uncalibrated drive |
| HP/KEYSIGHT |
X923A |
WR90 Sliding Short, uncalibrated rod drive |
| HP/KEYSIGHT |
X930A |
WR90 Shorting Switch |
| KEARFOTT |
C-9941 |
WR90 Isolator, 20 dB, 8.2-9.2 GHz |
| KEARFOTT |
C-9941 |
WR90 Isolator, 25 dB isolation, 8.20-8.95 GHz, 2.75 inch length |
| LECTRONIC |
LRL-511 |
WR90 E-Plane (series) Tee, 3 inches length |
| LRL |
531 |
WR90 Pickup Horn, 10 dBi gain |
| M.C.S. |
X-274 |
WR90 Switchable Attenuator, 0 or 40 dB |
| M.C.S. |
X-305 |
WR90 Slide Screw Tuner, vernier read |
| M.C.S. |
X362A |
WR90 Directional Coupler, 3 dB coupling |
| M.C.S. |
X362B |
WR90 Directional Coupler, 10 dB coupling |
| M.C.S. |
X-402 |
WR90 DPDT Dual Transfer Switch, manual operation |
| M/A-COM |
505186 |
WR90 (9.0-9.6 GHz) and WR34 (32.1-33.1 GHz) Dual Waveguide Straight Roary Joint, 9.18 inch length, cover/choke langes, tested to 20 PSI, VSWR<1.25 *new old stock, with test data* |
| MACOM |
M22641/20-04 |
WR90 x SMA(f) Adapter |
| MAURY MICROWAVE |
X151 |
WR90 H-Plane (Shunt) Tee |
| MAURY MICROWAVE |
X200A2 |
WR90 x 3.5mm female Adapter, 1.05 VSWR |
| MAURY MICROWAVE |
X200B2 |
WR90 x 3.5mm male Adapter, 1.05 VSWR |
| MAURY MICROWAVE |
X209D2 |
WR90 x APC7 Adapter, 1.05 VSWR |
| MAURY MICROWAVE |
X210D |
WR90 x SMA(f) Adapter, VSWR <1.20 |
| MAURY MICROWAVE |
X210D2 |
WR90 x SMA(f) Adapter, VSWR <1.05 |
| MAURY MICROWAVE |
X213D1 |
WR90 x N(m) Adapter, 1.10 VSWR |
| MAURY MICROWAVE |
X213D2 |
WR90 x N(f) Adapter, 1.05 VSWR |
| MAURY MICROWAVE |
X221H |
WR90 x N(f) End Launch Adapter, 1.25 VSWR |
| MAURY MICROWAVE |
X230K1 |
WR90 x 3.5mm male NMD End Launch Adapter |
| MAURY MICROWAVE |
X320D |
WR90 Standard Mismatch, 1.20 VSWR |
| MAURY MICROWAVE |
X320E |
WR90 Standard Mismatch, 1.50 VSWR |
| MAURY MICROWAVE |
X750B |
WR90 Isolator, 25 dB, 10 Watts maximum |
| MAURY MICROWAVE |
X750B |
WR90 Isolator, 20 dB, 8.2-12.0 GHz |
| MCCI WIRELESS |
16A3ST-20 |
WR90 Straight Section, 20 inches length, aluminum, cover/choke flanges |
| MCCI WIRELESS |
16A3ST-30 |
WR90 straight Section, 30 inches length, aluminum, cover/choke flanges |
| MCCI WIRELESS |
16A3ST-30.56 |
WR90 Straight Section, 30.56 inches length, aluminum, cover/choke flanges |
| MCCI WIRELESS |
16A3ST-32.13 |
WR90 Straight Section, 32.13 inches length, aluminum, cover/choke flanges |
| MCCI WIRELESS |
16A3ST-40 |
WR90 Straight Section, 40 inches length, aluminum, cover/choke langes |
| MDL |
90AC106-2F |
WR90 (choke flange) x N(f) Adapter |
| MDL |
90AC46-1E |
WR90 x N(f) Adapter |
| MDL |
90CT106-1F |
WR90 Short Body 10 dB Dir.Coupler, directivity 25 dB, 7.75 in. |
| MDL |
90CT86-1E |
WR90 Short Body 3 dB Dir. Coupler, directivity 30 dB, 9.25 in. |
| MDL |
90FC176-1 |
WR90 Short Body 18 dB Dir.Coupler, directivity 25 dB, 10 inches |
| MDL |
90FC29-1 |
WR90 Directional Coupler, 17 dB coupling, N(f) coupled port |
| MDL |
90LW26-1E |
WR90 Medium Power Termination, 75 Watts average |
| MDL |
90-TWi8-2F |
WR90 90 degree Stepped Twist Section, 2.3 inch length, cover/choke flanges |
| MDL |
90XT426-9E |
WR90 4-Port Crossguide Coupler, 20 dB coupling, choke flanges |
| MICROWAVE ASSOC. |
MA-1160L-5003 |
WR90 Isolator, 20 dB, 8.4-9.0 GHz, cover/choke flanges |
| MICROWAVE ASSOC. |
MA-536A |
WR90 Crystal Detector, negative polarity |
| MICROWAVE ENG. |
TR64C-022 |
WR90 x TNC(f) Adapter, with 1/2" NPT pressurization port *NEW* |
| MICROWAVE RESEARCH |
10050M |
CMR90 x N(f) Adapter |
| MICROWAVE RESEARCH |
X40L-7A-SP |
WR90 x APC7 Adapter |
| MICROWAVE RESOURCES |
WXD90-20/40-NF |
WR90 Dual Arm Crossguide Coupler, 20 dB and 40 dB coupling, N(f) coupled ports |
| MILITARY |
58-29001K01 |
WR90 (choke flange) fed Antenna with two Yagi director elements, approx. 10 dBi gain, 8.8-9.8 GHz, VSWR<1.35, 6 inches length, aluminum |
| MILITARY |
90 deg. SHORT |
WR90 1/4 Wavelength Short at 9 GHz, 12.15650mm depth, gold flash |
| MILITARY |
AT-48/UP |
WR90 Pyramidal Horn Antenna, 17 dBi gain, with integral transition to N(f) |
| MILITARY |
CG-176/AP |
WR90 Short Body Sidewall Coupler,20 dB,9-10 GHz, Nf coupled port |
| MILITARY |
SMC-52-4004 |
WR90 Directional Coupler, 6 dB coupling |
| MILITARY |
WR90 offset short |
WR90 0.25 Wavelength Offset Short at 9.0 GHz, 12.15650mm depth |
| MITEC |
M0926-07-03 |
CMR90 x N(f) Adapter |
| M-WAVE DESIGN |
90CA1235 |
CPR90 x 2.92mm(f) Adapter |
| NARDA |
1001 |
WR90 4-Port Crossguide Coupler, 20 dB coupling |
| NARDA |
300 |
WR90 Low Power Termination, 1 Watt average/ 1 kW peak, 1.015 VSWR |
| NARDA |
350-H |
WR90m 90 degree H-Plane Bend |
| NARDA |
410-10 |
WR90 Standard Reflection, 1.22 VSWR / 0.1 reflection coefficient |
| NARDA |
47X1 |
WR90 Level Set Attenuator |
| NARDA |
510 |
WR90 Tunable Detector |
| NARDA |
601A |
WR90 x N(f) Adapter |
| NARDA |
601B |
WR90 (choke flange) x N(f) Adapter |
| NARDA |
720-06 |
WR90 Fixed Attenuator, 6 dB |
| NARDA |
720-10 |
WR90 Fixed Attenuator, 10 dB |
| NARDA |
730 |
WR90 Variable Attenuator, 0-20 dB, lockable vernier drive |
| NARDA |
730S |
WR90 Level Set Attenuator, 0.5-25 dB, uncalibrated drive |
| NARDA |
930 |
WR90 H-Plane (Shunt) Tee |
| NARDA |
960 |
WR90 E-H Plane Tuner, uncalibrated lockable drives |
| NEC |
91374A |
WR90 Low Pass Filter, 12 GHz rolloff, ->25 dB rejection above 17.5 GHz, SMA(f) output |
| NEC |
WR90-SMA |
WR90 x SMA(f) Adapter |
| OMEGA LABS |
318B |
WR90 Directional Coupler, 6 dB coupling |
| OMEGA LABS |
968 |
WR90 x SMA(f) Adapter |
| OMNI-SPECTRA |
2001-6254-00 |
WR90 x SMA(m) Adapter |
| OMNI-SPECTRA |
20186/P |
WR90 x SMA(m) Adapter |
| OMNI-SPECTRA |
3001-6254-00 |
WR90 x TNC(f) Adapter |
| P&H LABS |
C2-X13322 |
WR90 Isoadapter, 18 dB isol., 8.4-12.0 GHz, SMA(f)-in/ WR90 out |
| PAMTECH |
WKB-1023-3A |
WR90 Iso-Adapter, 20 dB isolation, 11.6-12.4 GHz, WR90 input, SMA(f) output |
| PASTERNACK |
PE9804 |
WR90 x SMA(f) Adapter |
| PENN ENGINEERING |
4548-51BM1 |
WR90 x CPR137 Taper Section, 12 inches length, silver plated brass |
| PRD |
1116 |
WR90 Sliding Load |
| PRD |
140-C |
WR90 Fixed Attenuator, 10 dB |
| PRD |
140-E |
WR90 Fixed Attenuator, 30 dB |
| PRD |
159-A |
WR90 Variable Attenuator, 0-20 dB, calibrated scale |
| PRD |
159-B |
WR90 Variable Attenuator, 0-40 dB, calibrated scale |
| PRD |
303-A |
WR90 Slide Screw Tuner, uncalibrated drives |
| PRD |
354-C |
WR90 x N(f) Adapter |
| PRD |
402 |
WR90 Sidewall Directional Coupler, 20 dB, 8.5-9.6 GHz, 9" length |
| PRD |
408-S |
WR90 Directional Coupler, 10 dB coupling |
| PRD |
461 |
WR90 Hybrid Tee |
| PRD |
464 |
WR90 E-Plane (Series) Tee |
| QUANTATRON |
W6XA |
WR90 SPDT Solenoid Driven Switch, failsafe, 22-30 VDC 220mA, choke flanges |
| RANTEC |
WX404 |
WR90 to Dual Waveguide (H-Plane parallel) Taper & Polarizer |
| RAYTHEON |
10109000 |
CMR90 3-port Crossguide Coupler, 8 dB coupling, choke flanges |
| SAGE LABS |
W12MA |
WR90 Low Pass Filter, >40 dB rejection above 17 GHz |
| SIVERS LAB |
7240X |
WR90 Directional Coupler, 3 dB coupling, directivity 40 dB |
| SIVERS LAB |
PM-7101-X |
WR90 Precision Direct Reading Attenuator, 0-60 dB |
| SIVERS LAB |
PM-7220-X |
WR90 Termination, 1 Watt, 1.03 VSWR |
| SIVERS LAB |
SL-5600/61 |
WR90 Manual DPDT Transfer Switch |
| SPERRY |
354 |
WR90 Sliding Load |
| SYSTRON DONNER |
DBG-058 |
WR90 x SMA(f) Adapter |
| SYSTRON DONNER |
DBG-275 |
WR90 Pressurization Section, with 0-60 PSI guage and inlet, 3.5 inches length |
| SYSTRON DONNER |
DBG-310 |
WR90 Crystal Detector, negative polarity |
| SYSTRON DONNER |
DBG-440A-06 |
WR90 Fixed Attenuator, 6 dB |
| SYSTRON DONNER |
DBG-440A-10 |
WR90 Fixed Attenuator, 10 dB |
| SYSTRON DONNER |
DBG-440F-07 |
WR90 Fixed Attenuator, 7 dB |
| SYSTRON DONNER |
DBG-480A |
WR90 Isolator, 25 dB, 8.2-12.4 GHz, 20 Watts average power max. |
| SYSTRON DONNER |
DBG-630-20 |
WR90 4-Port Crossguide Coupler, 20 dB coupling |
| SYSTRON DONNER |
DBG-642-20 |
WR90 Crossguide Dual Dir. Coupler, 20 dB, N(f) coupled ports |
| SYSTRON DONNER |
DBG-675-10 |
WR90 Directional Coupler, 10 dB coupling |
| SYSTRON DONNER |
DBG-S-385 |
20mm dia. Circular Waveguide High Power Load, 300 Watts average |
| TECHNICRAFT |
102628 |
WR90 High Power Load, 500 Watts average/ 290 kW peak |
| TELEDYNE |
WR90 isolator |
WR90 Isolator, 25 dB isolation, 8.2-9.8 GHz, 1.5 inch length |
| TOSHIBA |
FCX-67 |
WR90 Circulator, 20 dB isolation, 8.3-9.6 GHz |
| WAVEGUIDE INC. |
E-H Tuner |
WR90 E-H Plane Tuner, micrometer drives |
| WAVELINE |
60087 |
WR90 Short Body Directional Coupler, 27 dB, 9.0-10.5 GHz, 5 inches length, N(f) coupled port |
| WAVELINE |
601-TNCF |
WR90 x TNC(f) Adapter |
| WAVELINE |
601-WLM |
WR90 x SMA(f) Adapter |
| WAVELINE |
60289 |
WR90 Directional Coupler, 10 dB coupling, directivity 40 dB, broadwall coupled arm with H-Plane bend |
| WAVELINE |
60554 |
WR90 Fixed Attenuator, 16 dB |
| WAVELINE |
60563 |
WR90 Directional Coupler, 10 dB coupling |
| WAVELINE |
606-10 |
WR90 Fixed Attenuator, 10 dB |
| WAVELINE |
609 |
WR90 Adjustable Attenuator, 0.5-30 dB, uncalibrated, locking |
| WAVELINE |
611 |
WR90 Variable Attenuator, 0-30 dB, vernier read |
| WAVELINE |
61163 |
CMR90 x N(f) Adapter |
| WAVELINE |
612-DR |
WR90 Variable Attenuator, 0-40 dB, gage read, 6.5" length |
| WAVELINE |
613 |
WR90 Level Set Attenuator, 0-20 dB, uncalibrated drive |
| WAVELINE |
615 |
WR90 Tunable Diode Mount, for 1N23, BNC(f) output |
| WAVELINE |
622 |
WR90 Direct Reading Precision Attenuator, 0-60 dB |
| WAVELINE |
622-R |
WR90 Panel Mounting Direct Reading Attenuator, 0-60 dB |
| WAVELINE |
635-2 |
WR90 90 degree E-Plane Mitered Elbow, asymetrical, 1 in. offset |
| WAVELINE |
643-2-12 |
WR90 Straight Section, 12 inches length, brass |
| WAVELINE |
657 |
WR90 Hybrid Tee |
| WAVELINE |
658 |
WR90 Matched Hybrid Tee |
| WAVELINE |
659 |
WR90 E-H Plane Tuner, micrometer drives |
| WAVELINE |
660 |
WR90 E-H Plane Tuner, uncalibrated drives |
| WAVELINE |
669-20 |
WR90 4-Port Crossguide Coupler, 20 dB coupling |
| WAVELINE |
672 |
WR90 Short Body Sidewall Directional Coupler, 30 dB coupling, 8.8-9.2 GHz, directivity 20 dB, 9.62 inches length, choke flanges |
| WAVELINE |
673-10 |
WR90 Ultra-Flat Directional Coupler, 10 dB coupling |
| WAVELINE |
673-20 |
WR90 Ultra-Flat Directional Coupler, 20 dB coupling |
| WAVELINE |
674-10 |
WR90 Directional Coupler, 10 dB coupling |
| WAVELINE |
678-E |
WR90 2-Position 4-Port DPDT Switch, manually operated, E plane switch |
| WAVELINE |
678-H |
WR90 2-Position 4-Port DPDT Switch, manually operated, H plane switch |
| WAVELINE |
680 |
WR90 Shorting Switch |
| WAVELINE |
683CMR |
CMR90 Slide Screw Tuner |
| WAVELINE |
688 |
WR90 High Power Load, 2.5 kW average, forced air cooled, 115VAC |
| WAVELINE |
691-2 |
WR90 45 degree Twist Section, 6 inches length |
| WAVELINE |
698-PT |
WR90 Single Cavity Tunable Bandpass Filter, 9-12 GHz, 5 MHz 3 dB passband, 15 dB insertion loss, micrometer drive |
| WAVELINE |
699 |
WR90 Standard Gain Horn, 15 dBi gain mid-band |
| WAVELINE |
794-D |
WR90 (choke flange) x WR62 (choke flange) Taper Section, 4 inches length |
| WAVELINE |
90106 |
WR90 4-Port Crossguide Coupler, 30 dB coupling, N(f) coupled ports, cover/choke flanges, 2.6 inch insertion length, aluminum |
