| MANUFACTURER |
MODEL |
DESCRIPTION |
| 3 dBm |
M-111 |
WR75 Isolator, 25 Db, 10.0-14.5 GHz |
| AIRTRON |
WR75 flex 6" |
WR75 Jacketed Flexible Waveguide, 6.15 inches length, brass, cover/choke flanges |
| AML |
3844117 |
WR75 Tuned Load, 12.6-13.0 GHz, 5 Watts, VSWR <1.2, 0.8" length |
| ANDREW |
51747-36 |
WR75 Flexible/Twistable Waveguide Section, 36 in. length, cover/choke flanges *NEW* |
| ANDREW |
55675-75 |
WR75 Pressurization Section,5/8" thick, 3/8" inlet, cover/choke |
| ANDREW |
C075BNSG |
WR75 x N(f) Adapter |
| ANRITSU |
23UM120 & 24UM120 |
WR75 1/8 wavelength & 3/8 wavelengrth Offset short pair |
| APOLLO MICROWAVES |
10707-9-1 |
WR75 3-port (terminated) Crossguide Coupler, 40 dB coupling, SMA(f) coupled port |
| APOLLO MICROWAVES |
12087 |
WR75 180 degree E-Plane Bend, 2.62 inches center to center |
| APOLLO MICROWAVES |
14049-4 |
WR75 3-Port Crossguide Coupler, 50 dB coupling, N(f) coupled port on both sides of single coupled arm, supplied with Narda 370BNM 5 Watt termination |
| APOLLO MICROWAVES |
14342 |
WR75 Band Pass Filter, 10-13 GHz, 2.47 inches length |
| ARRA |
75-227-3 |
WR75 Unjacketed Flexible Waveguide Section, 3 inches length |
| ARRA |
75-463 |
WR75 x APC7 Adapter, aluminum body |
| ARRA |
75-463B |
WR75 x APC7 Adapter, brass body |
| ARRA |
75-480-03 |
WR75 3 dB Fixed Attenuator, 1 Watt maximum |
| ARRA |
75-480-06 |
WR75 6 dB Fixed Attenuator, 1 Watt maximum |
| ARRA |
75-480-20 |
WR75 20 dB Fixed Attenuator, 1 Watt maximum |
| ATLANTIC MICROWAVE |
206-MPT |
WR75 Medium Power Termination, 150 Watts average power |
| ATLANTIC MICROWAVE |
AMC-0544-04 |
WR75 4 dB Fixed Attenuator |
| ATLANTIC MICROWAVE |
AMC-0544-38 |
WR75 38 dB Fixed Attenuator |
| ATM |
75-253B-6 |
WR75 x N(f) Adapter |
| CASWELL ELEC. |
KE-101-D |
WR75 Isolator, 20 dB, 10-13 GHz |
| CHANNEL MICROWAVE |
M620P |
WR75 x SMA(f) Adapter |
| CMT |
RA75-N-F-4AA |
WR75 (choke flange) x N(f) Adapter |
| CMT |
RA75-SMA-F-13A-AA |
CPR75 x SMA(f) Adapter |
| CMT |
RFG75-20-1A1A-MSR |
WR75 Flexible Waveguide Section, 20 inches length *NEW* |
| CMT |
RHB75 |
WR75 90 degree H-Plane Bend |
| CMT |
RPS75-2SMAF40 |
WR75 Power Sampler, 40 dB coupling/SMA(f), 0.75 in. length *NEW* |
| CMT |
RPS75-60 |
WR75 Power Sampler, 60 dB coupling, SMA(f) coupled port, 0.75 inch length |
| DEMORNAY BONARDI |
DBFA-057 |
WR75 x N(f) Adapter, brass |
| DEMORNAY BONARDI |
DBFA-057-SA |
WR75 (choke flange) x N(f) Adapter, aluminum |
| DESITRON |
DXN075-40C7 |
WR75 3-Port Crossguide Coupler, 40 dB coupling, N(f) coupled port |
| DIGITAL MICROWAVE |
WR75 LOAD |
WR75 Low Power Termination, 2 Watts, 1.04 VSWR |
| E&M LABS |
M110LI |
WR75 Isolator, 25 dB, 10-15 GHz |
| FLANN MICROWAVE |
17110 |
WR75 Precision Direct Reading Attenuator, 0-60 dB |
| GENERIC |
CPR75 LOAD |
CPR75 5 Watt Load |
| GENERIC |
WR75 13GHz LPFL |
WR75 Low Pass Filter, 13.3 GHz, 5 inches length |
| GENERIC |
WR75 14.5G BP |
WR75 Bandpass Filter, 14.275-14.925 GHz, 5.5 in. length |
| GENERIC |
WR75 180 H |
WR75 180 degree H-Plane Bend, 4.12 inches center to center |
| GENERIC |
WR75 2" |
WR75 Straight Section, 2 inches length, brass, choke flanges |
| GENERIC |
WR75 34.5" |
WR75 Straight Section, 34-1/2 inches length, aluminum, choke fl. |
| GENERIC |
WR75 36.75" |
WR75 Straight Section, 36.75 inches length, brass |
| GENERIC |
WR75 4.62" FLEX |
WR75 Unjacketed Flexible Waveguide Section, 4-5/8 inches length |
| GENERIC |
WR75 5.4" |
WR75 Straight Section, 5.4 inches length, brass, choke flanges |
| GENERIC |
WR75 90 H |
WR75 90 degree H-Plane Bend |
| GENERIC |
WR75 90 H MITRE |
WR75 Asymertrical 90 degree H-Plane Mitre Bend, 1.5"x2.25" legs, brass, choke flanges |
| GENERIC |
WR75 asym E 90 |
WR75 Asymetrical 90 degree E-Plane Mitre Bend, 1.5"x4.4" legs, brass, choke flanges |
| GENERIC |
WR75 conical horn |
WR75 Conical Horn, circular polarization, 7.18" overall length, 1.70" aperture |
| GENERIC |
WR75 faraday isolator |
WR75 Isolator, 30 dB isolation, 10-14 GHz, 5 inches length |
| GENERIC |
WR75 flange adapter' |
WR75 cover flange to CPRG75 grooved flange Adapter, 4 inches length, brass |
| GENERIC |
WR75 H TEE |
WR75 H-Plane (Shunt) Tee |
| GENERIC |
WR75 Press.Section |
WR75 Pressurization Section,1/4"NPT inlet,1/2" thick,cover/choke |
| GENERIC |
WR75 x CPR75 |
WR75 x CPR75 (grooved) Flange Adapter, 1-7/8 inch length, brass |
| HARRIS |
3084355 |
WR75 Band Pass Filter, 10.25-15.0 GHz, -30 dB at 9.5 & 16.4 GHz; -60 dB at 8.6 & 17.6 GHz |
| HARRIS |
SD-60477 |
WR75 Bandpass Filter, 11.45-11.49 GHz, with 20/40/60 dB step att |
| HARRIS FARINON |
W117122T |
WR75 Junction Isolator, 35 dB, 11.7-12.2 GHz |
| HNL, INC. |
M-173 |
WR75 x SMA(f) Adapter |
| HP/KEYSIGHT |
M362A |
WR75 Low Pass Fil;ter, 19 GHz (-30 dB) cutoff |
| HP/KEYSIGHT |
M382A |
WR75 Precision Direct Reading Attenuator, 0-50 dB |
| HP/KEYSIGHT |
M421A |
WR75 Crystal Detector, negative polarity |
| HP/KEYSIGHT |
M424A |
WR75 Crystal Detector, negative polarity |
| HP/KEYSIGHT |
M532A |
WR75 Direct Reading Frequency Meter |
| HP/KEYSIGHT |
M752D |
WR75 Directional Coupler, 20 dB coupling |
| HP/KEYSIGHT |
M870A |
WR75 Slide Screw Tuner, vernier read |
| HP/KEYSIGHT |
MP292A |
WR75 x WR62 Waveguide Taper |
| HP/KEYSIGHT |
MP292B |
WR75 x WR62 Waveguide Taper |
| HP/KEYSIGHT |
MX292B |
WR90 x WR75 Waveguide Taper |
| HUGHES |
100-008-04 |
WR75 Circulator, 16 dB isolation, 11-14 GHz |
| HUGHES |
100-576 |
WR75 Detector, positive polarity (1N78B), BNC(f) output |
| HUGHES |
2099385 |
WR75 29 dB Fixed Attenuator |
| INTERNATIONAL TELECOM COMPONENTS |
01007732-08 |
WR75 High Power Load, 500 Watts average power |
| KW MICROWAVE |
58-S04 |
WR75 Pressurization Section, 0.6 inch thick, cover/choke flanges |
| LOGUS |
|
WR75 DPDT Transfer Switch, manual or 22-32 VDC operation |
| LOGUS |
LM75BPLXX76 |
WR75/CPR75 DPDT Transfer Switch, manual or 24VDC operation |
| LOGUS |
LM75BXLXX128 |
WR75 DPDT Transfer Switch, manual or 22-32 VDC operation |
| LOGUS |
LO75BUL7X51 |
WR75 DPDT Transfer Switch, manual or 24VDC operation |
| LORAL |
23649G1 |
CPR75 (grooved flange) x N(f) Adapter |
| M/A-COM |
7000-6257-00 |
WR75 x APC7 Adapter |
| M/A-COM ASSOC. |
WR75 8 dB att. |
WR75 8 dB Fixed Attenuator |
| MAURY MICROWAVE |
M103A5 |
WR75 Standard Section, 5 inches length |
| MAURY MICROWAVE |
M200A2 |
WR75 x 3.5mm(f) Asdapter, 1.05 VSWR |
| MAURY MICROWAVE |
M229A6 |
WR75 x APC7 End Launch Adapter, 1.15 VSWR |
| MAURY MICROWAVE |
M229D |
WR75 x APC7 End Launch Adapter, 1.25 VSWR |
| MAURY MICROWAVE |
M230K1 |
WR75 x 3.5mm male NMD End Launch Adapter |
| MAURY MICROWAVE |
M314 |
WR75 Sliding Termination, 1 Watt maximum, 1.01 VSWR |
| MAURY MICROWAVE |
M750A |
WR75 Isolator, 30 dB isolation, 10-15 GHz |
| MICROTECH |
109011-1 |
WR75 (choke flange) Low Power Termination, 2 Watts average |
| MICROTECH |
MTPS75UUN24B |
WR75 Flexible / Twistable Waveguide Section, jacketed, 24 in. length *NEW* |
| MICROWAVE ASSOC. |
50425B |
WR75 20 dB Fixed Attenuator, 10-12.5 GHz |
| MICROWAVE ASSOC. |
94733 |
WR75 60 dB Fixed Attenuator, 12-14.5 GHz |
| MICROWAVE ASSOC. |
J6153 |
WR75 Circulator, 20 dB isolation, 10-13 GHz |
| MICROWAVE RESEARCH |
M160-40 |
WR75 Directional Coupler, 40 dB coupling |
| MICROWAVE RESEARCH |
M240-417 |
Half Height WR75 x 7mm Adapter,1.17x1.00" flange,0.87x0.75"holes |
| MICROWAVE RESEARCH |
M40-3C |
WR75 x SMA(f) Adapter |
| MICROWAVE RESEARCH |
M40-3MAM |
WR75 x SMA(m) Adapter |
| MICROWAVE RESEARCH |
M40-7A |
WR75 x APC7 Adapter |
| MID-CENTURY |
17/ 14 |
WR75 4-Port Directional Coupler,30dB, needs external termination |
| M-WAVE DESIGN |
75CA1SF |
WR75 x SMA(f) Adapter |
| M-WAVE DESIGN |
75IR |
WR75 Isolator, 25 dB, 10.0-14.5 GHz |
| NARDA |
75-601 |
WR75 x N(f) Adapter |
| NEICO MICROWAVE |
16712 |
CPR75 DPDT Transfer Switch, manual or 24VDC operation |
| NEICO MICROWAVE |
16766-1 |
CPR75 90 degree E-Plane Mitre Bend, 6" x 1-3/4" legs |
| NEICO MICROWAVE |
16768-1 |
CPR75 180 degree (U-Shape) E-Plane Mitre Bend, 7 in. c-to-c |
| NEICO MICROWAVE |
16802-1 |
CPR75 90 degree E-Plane Mitre Bend, 4-1/2" x 1" legs |
| NEICO MICROWAVE |
16811-1 |
CPR75 Straight Section, 3-1/2 inches length, grooved flanges |
| NEICO MICROWAVE |
30501-G1 |
CPR75 Short Body Dir. Coupler, 10 dB coupling, 3" long,11-15 GHz |
| OMEGA LABS |
3145A |
WR75 3 dB Fixed Attenuator |
| OMEGA LABS |
3145B |
WR75 6 dB Fixed Attenuator |
| OMEGA LABS |
3905X4 |
WR75 x N(m) Adapter |
| OMEGA LABS |
3945 |
WR75 x SMA(f) Adapter |
| OMNI-SPECTRA |
2000-6257-00 |
WR75 x SMA(f) Adapter |
| OMNI-SPECTRA |
2000-6267-00 |
WR75 (choke flange) x SMA(f) Adapter |
| P&H LABS |
C3-X14333 |
WR75 Isolator, 20 dB, 10.0-12.2 GHz, 2 inches length |
| PAMTECH |
RHG2011 |
WR75 Isolator, 25 dB, 10.8-12.3 GHz |
| PENN ENGINEERING |
3105M1 |
WR75 x N(f) Adapter |
| PRODELIN |
WR62 x WR75 |
WR62 (choke flange) x WR75 Taper Section, 3 inches length |
| QUASAR MICROWAVE |
WR75 flex-twist 1m |
WR75 Flexible / Twistable Waveguide, jacketed, 39.6 inch length, choke flanges |
| RACAL |
220-374-1 |
WR75/CPR75 x WR62 (choke flange) Taper Section, 1.5 in.length |
| RAYTHEON |
A314634-P2 |
WR75 Level Set Attenuator, 0-35 dB, uncalibrated |
| ROCKWELL |
124104-3 |
WR75 Unjacketed Flexible Waveguide, 6 inches length, brass |
| SECTOR MICROWAVE |
SM75-4GL5 |
WR75 Manual or Motor operated DPDT Switch, 235VAC |
| SECTOR MICROWAVE |
SM75-4PL3 |
WR75 Manual or Motor operated DPDT Switch, 117VAC |
| SINGER |
1050 |
WR75 Pickup Horn, 7 dBi gain, right angle feed |
| SPECIALTY MICROWAVE |
114281 |
WR75 90 degree Twist Section, 3 inches length, cover/choke flanges |
| SPECIALTY MICROWAVE |
WR75 H bend |
WR75 90 degree H-Plane Bend, brass, 1.5 inch bend radius |
| STRUTHERS |
H123XG-40 |
WR75 Variable Attenuator, 0-40 dB |
| STRUTHERS ELEC. |
H120XG-3 |
WR75 3 dB Fixed Attenuator, 1 Watt maximum |
| SYSTRON DONNER |
DBFA-058 |
WR75 x SMA(f) Adapter |
| SYSTRON DONNER |
DBFA-210-8.03 |
WR75 Straight Section, 8.03 inches length |
| SYSTRON DONNER |
DBFA-275 |
WR75 Feedthru Bulkhead, 3.75 inch length, 3.5 inch diameter 6-hole flange, cover/choke flanges, brass |
| SYSTRON DONNER |
DBFA-440A-50 |
WR75 50 dB Fixed Attenuator |
| SYSTRON DONNER |
DBFA-480A |
WR75 Isolator, 20 dB, 10-15 GHz |
| SYSTRON DONNER |
DBFA-520-15 |
WR75 Standard Gain Horn, 15 dBi gain mid-band |
| SYSTRON DONNER |
DBFA-675-03 |
WR75 Directional Coupler, 3 dB coupling |
| TDK |
9317.2 |
WR75 Isolator, 20 dB, 10.4-12.7 GHz, 1 inch length |
| TECHNICRAFT |
TR-605062-7 |
WR75 Straight Section, 1-1/2 inches length |
| TECHNICRAFT |
TR-605063-12 |
WR75 Straight Section, 8-1/4 inches length |
| TECHNICRAFT |
TR-605079 |
WR75 Termination, 5 Watts, VSWR <1.5 |
| UNIQUE BROADBAND SYSTEMS |
121-75-N-F-C-T21 |
WR75 x N(f) Adapter |
| UTE MICROWAVE |
CWT-6515-WT |
WR75 High Power Isolator, 20 dB, 11.5-15.0 GHz, 100 Watts max. |
| WAVEGUIDE ENGINEERING |
075-2234 |
WR75 90 degree H-Plane Bend |
| WAVELINE |
7501-APC7 |
WR75 x APC7 Adapter |
| WAVELINE |
7501-NF |
WR75 x N(f) Adapter |
| WAVELINE |
7501-WLM |
WR75 x SMA(f) Adapter |
| WAVELINE |
7506-03 |
WR75 3 dB Fixed Attenuator |
| WAVELINE |
7506-40 |
WR75 40 dB Fixed Attenuator |
| WAVELINE |
7508-C |
WR75 Variable Phase Shifter, 0-180 degrees, dial gage read, 0.5 dB maximum insertion loss |
| WAVELINE |
7510 |
WR75 Level Set Attenuator, 0-40 dB, uncalibrated drive |
| WAVELINE |
7511 |
WR75 Variable Attenuator, 0-30 dB, counter dial read |
| WAVELINE |
7511 |
WR75 Variable Attenuator, 0.5-30 dB, vernier drive |
| WAVELINE |
7522 |
WR75 Precision Direct Reading Attenuator, 0-60 dB |
| WAVELINE |
7522R |
WR75 Precision Direct Reading Attenuator, 0-60 dB, rackmount version orients input/output arms parallel to panel mount |
| WAVELINE |
7533 |
WR75 90 degree H-Plane Bend, cover/choke flanges |
| WAVELINE |
7533-2 |
WR75 90 degree H-Plane Bend |
| WAVELINE |
7554 |
WR75 Low Power Termination, 2 Watts, 1.02 VSWR |
| WAVELINE |
7569-20 |
WR75 4-Port Crossguide Coupler, 20 dB coupling |
| WAVELINE |
7573-10 |
WR75 Ultra-Flat Directional Coupler, 10 dB coupling |
| WAVELINE |
7574-10 |
WR75 Directional Coupler, 10 dB coupling |
| WAVELINE |
7585 |
WR75 H-Plane (Shunt) Tee |
| WAVELINE |
90893 |
WR75 Dual Directional Coupler, 30 dB fwd arm/ 10 dB refl arm,19" |
| WAVELINE |
90959-3 |
WR75 Directional Coupler, 3 dB coupling, directivity 40 dB |
| WAVELINE |
92100 |
WR75 Variable Attenuator, 0-60 dB, dial attenuation indicator in 10 dB increments, lockable, 7.5 inches length |
