| MANUFACTURER |
MODEL |
DESCRIPTION |
| AERCOM |
129511 |
CPR137 (output) x SMAf (input) Iso-adapter, 18 dB isolation, 5.8-7.0 GHz, with -40 dB SMAf test ports |
| ALCATEL |
402002776 |
CMR137 Circulator, 23 dB isolation, 5.9-6.4 GHz |
| ALCATEL |
470117828 |
CMR137 x SMA(f) End Launch Adapter, 5.9-6.4 GHz bandwidth |
| ANDREW |
54418-137 |
CPR137 (grooved flange) x N(f) Adapter |
| ANDREW |
55001-137 |
WR137 Pressure Window, brass.0 PSI maximum |
| ANDREW |
55249-4 |
WR137 choke flange x CPRG137 Flange Adapter, 4 inches length, brass |
| ANDREW |
55407-137-3 |
CPR137 90 degree Twist Section, 12 inches length, brass, grooved flanges on both ends |
| ANDREW |
55414 |
CP:R137 Straight Section, 12 inches length, brass, grooved flanges on both ends |
| ANDREW |
55414-12-3 |
CPRG137 Straight Section, 12 inch length, brass *NEW* |
| ANDREW |
55437-137 |
CPR137 (grooved flange) x CMR137 Adapter, 4 inches length, brass |
| ANDREW |
59220-33 |
CPRG137 x CPRG112 Taper Section, 7.5 inches length, brass *NEW* |
| ANDREW |
65581-4" |
CPR137 (grooved flange) x CMR137 Adapter, 4 in. length, brass |
| ANDREW |
65791-137-4 |
CMR137 Stepped 90 degree Twist Section, brass, 2.12 inch length |
| ANDREW |
C137-CNDG |
CPR137 (grooved flange) x N(f) Adapter |
| ANDREW |
C137-CNSG |
CPR137 (grooved flange) x N(f) Adapter, brass *NEW* |
| ANDREW |
C137-ENSG |
CMR137 x N(f) Adapter , brass *NEW* |
| ANDREW |
H137MC102C102DG |
CPR137 (grooved flanges) 90 degree H-Plane Bend, brass |
| ANDREW |
R137PC0040ESN |
CPR137 (grooved flange) x CMR137 Flange Adapter, brass, 4 inches length |
| ANRITSU |
23UA137 & 24UA137 |
CPR137/WR137 1/8-wavelength & 3/8-wavelength Offset short pair |
| ANRITSU |
35UA137N |
CPR137/WR137 x N(m) Adapter |
| APOLLO MICROWAVES |
10514 |
CPR137 (grooved flange) x N(f) Adapter |
| APOLLO MICROWAVES |
15543-9 |
CPR137 High Power Isolator, 20 dB, 5.7-7.2 GHz, 200 Watts average power, 4.25 inches insertion length |
| APOLLO MICROWAVES |
16001 |
CPR137 5.85-6.65GHz Harmonic Suppression Filter,-80dB 11.7-13.3G |
| APOLLO MICROWAVES |
27-1752B |
Circulator-Adapter, 18 dB isol., TNC(m)-in/ CPR137-out/ SMA(m) |
| APOLLO MICROWAVES |
CPR137 load |
CPR137 High Power Load, 300 Watts average power |
| ARRA |
137-520-25T |
WR137 Variable Attenuator, 0-25 dB, vernier drive |
| ARRA |
CPR137G-460B |
CPR137 (grooved flange) x N(f) Adapter |
| ASNRITSU |
26UA137 |
WR137/CPR137 Low Power Termination |
| ATLANTIC MICROWAVE |
A3192724-204 |
CPR137 Low Power Termination, 1 Watt maximum, VSWR <1.04 |
| ATLANTIC MICROWAVE |
CPR137 short set |
CPR137 Offset Short Pair, 1/8 wave (6.83mm) & 3/8 wave (20.50mm) |
| ATLANTIC MICROWAVE |
SHORT 1/8 & 3/8 |
CPR137 1/8 wavelength (6.83mm) & 3/8 wavelength (20.50mm) Short Pair |
| ATM |
137-253B-2 |
CPR137 x N(f) Adapter |
| ATM |
137-305B-40-1-1 |
CPRG137 Directional Coupler, 40 dB coupling, SMA(f) coupled arm |
| CABLEWAVE |
901170-42 |
CPR137 x CMR137 Adapter, 4.6 inches length, aluminum |
| CABLEWAVE |
920411 |
CPR137 (grooved flange) x CMR137 Flange Adapter, brass, 4 inches length |
| CASWELL ELEC. |
C-101-AX |
CMR137 Isolator, 20 dB, 5.8-6.7 GHz, 3-1/2 inches length |
| CHANNEL MICROWAVE |
LJ322 |
WR137 Isolator, 18 dB, 6.25-6.50 GHz, 200 Watts max., choke fl's |
| CMT |
RA137-K-F-21BC |
CMR137 x 2.92mm(f) Adapter |
| CMT |
SMC-570708 |
CPR137 (grooved flange) Low Power Termination, 5 Watts, 1.05 VSWR, 3.5 inch length |
| COMMSCOPE/ ANDREW |
19007-137 |
WR137 waveguide Rigid Hanger Assembly *new* |
| DEMORNAY BONARDI |
DBHJ-018 |
WR137 x WR112 Taper Section, 4.5 inches length |
| DEMORNAY BONARDI |
DBJ-224 |
WR137 90 degree E-Plane Bend |
| DEMORNAY BONARDI |
DBJ-274-10 |
WR137 90 degree Twist Section, 19 inches length |
| DEMORNAY BONARDI |
DBJ-630-20 |
WR137 4-Port Crossguide Coupler, 20 dB coupling |
| DEMORNAY BONARDI |
DBJ-632 |
WR137 3-Port Crossguide Coupler, 20 dB coupling, N(f) coupled port |
| DEMORNAY BONARDI |
DJK-018 |
WR137 x WR187 Taper Section, 5.5 inches length |
| DENSITRON |
CPR137 load |
CPRF137 High Power Load, 1 kW average power, 16.5 inches length x 5 inches x 5 inches |
| DESITRON |
131-137-CPR-T1 |
CPR137 Low Power Termination, 2 Watts average, 1.05 VSWR |
| DIAMOND ANTENNA |
6545 |
WR137 Level Set Attenuator, 0-20 dB |
| FARINON |
89-80442-027 |
CPRG137 x CMR137 Adapter, 1.75 inch length, brass |
| FERROCOM |
277-0444-030 |
CMR137 Circulator, 25 dB isolation, 5.8-7.2 GHz |
| FERROCOM |
609 |
CMR137 Circulator, 20 dB, 5.925-6.425 GHz |
| FERROCOM |
6189-SFI |
CMR137 Isoadapter, 5.925-6.425 GHz, SMA(f) input / CMR137 output |
| FERROTEC |
G3711 |
CMR137 Isolator, 20 dB, 6.1-6.7 GHz |
| FXR/MICROLAB |
C155A |
WR137 Direct Reading Variable Attenuator, 0-20 dB |
| FXR/MICROLAB |
C311A |
WR137 Slide Screw Tuner, vernier read |
| FXR/MICROLAB |
C510D |
WR137 Standard Mismatch, VSWR 1.20 |
| FXR/MICROLAB |
C614U |
CMR137 Short Body Dir. Coupler, 20 dB, 5.8-6.5 GHz, 12 inches |
| FXR/MICROLAB |
C623B |
WR137 90 degree E-Plane Bend |
| FXR/MICROLAB |
C630A |
WR137 Sliding Short, vernier read |
| FXR/MICROLAB |
C638A (cmr) |
CMR137 Standard Gain Horn, 22 dBi gain mid-band |
| GENERIC |
CMR137 E 90 |
CMR137 90 degree E-Plane Bend |
| GENERIC |
CPR137 x CMR137 |
CPR137 to CMR137 Flange Adapter, 3 inches length, brass |
| GENERIC |
CPR137 x CMR137 |
CPRF137 x CMR137 Flange Adapter Section, brass |
| GENERIC |
CPR137 x CPR112 |
CPR137 x CPR112 Taper Section, brass, 7.5 inches length |
| HP/KEYSIGHT |
J281A |
WR137 x N(f) Adapter |
| HP/KEYSIGHT |
J370D |
WR137 Fixed Attenuator, 20 dB, 1 Watt maximum |
| HP/KEYSIGHT |
J375A |
WR137 Direct Reading Variable Attenuator, 0-20 dB, 1 Watt max. |
| HP/KEYSIGHT |
J382A |
WR137 Precision Direct reading Attenuator, 0-50 dB |
| HP/KEYSIGHT |
J424A |
WR137 Crystal Detector, negative polarity |
| HP/KEYSIGHT |
J424A-002 |
WR137 Crystal Detector with matched load, negative polarity |
| HP/KEYSIGHT |
J485B |
WR137 Tunable Detector Mount, neg. polarity, uncalibrated drive |
| HP/KEYSIGHT |
J486A |
WR137 Thermistor Mount, for HP 432 series power meters |
| HP/KEYSIGHT |
J532A |
WR137 Direct Reading Frequency Meter |
| HP/KEYSIGHT |
J750D |
WR137 4-Port Crossguide Coupler, 20 dB coupling |
| HP/KEYSIGHT |
J750E |
WR137 4-Port Crossguide Coupler, 30 dB coupling |
| HP/KEYSIGHT |
J752A |
WR137 Directional Coupler, 3 dB coupling |
| HP/KEYSIGHT |
J752C |
WR137 Directional Coupler, 10 dB coupling |
| HP/KEYSIGHT |
J752D |
WR137 Directional Coupler, 20 dB coupling |
| HP/KEYSIGHT |
J870A |
WR137 Slide Screw Tuner, vernier read |
| HP/KEYSIGHT |
J880 |
WR137 E-H Plane Tuner |
| HP/KEYSIGHT |
J885A |
WR137 Direct Reading Phase Shifter, 0-360 degrees |
| HP/KEYSIGHT |
J910A |
WR137 Termination, 1 Watt |
| HP/KEYSIGHT |
J914A |
WR137 Moving Load, 1 Watt, uncalibrated drive |
| HP/KEYSIGHT |
J920A |
WR137 Adjustable Short, uncalibrated drive |
| HUBER + SUHNER |
S42015 |
CPR137 (grooved flange) X N(f) Adapter |
| INNOVATECH |
137-CMRCC-PRT400 |
CPRG137 to CMR137 Flange Adaper, brass, 4.25 inch length |
| INNOVATECH |
137-CPRCC-PRT200 (f) |
CPR137 (flat, untapped flange) to CPR137 (flat, tapped flange) Straight Section, brass, 2 inch length |
| INNOVATECH |
137-CPRCC-PRT200 (G) |
CPR137 (grooved, untapped flange) to CPR137 (grooved, tapped flange) Straight Secion, brass, 2 inch length |
| KEARFOTT |
W277 |
WR137 Isolator, 40 dB, 5.8-6.5 GHz |
| LIEDER DEVELOPMENT |
CMR137-SMA |
CMR137 x SMA(f) Adapter |
| LIEDER DEVELOPMENT |
CPRG137 100W load |
CPRG137 Medium Power Load, 100 Watts average |
| LIEDER DEVELOPMENT |
LD137-CN |
CPR137 x N(f) Adapter |
| LIEDER DEVELOPMENT |
LD137-CN-G |
CPR137 (grooved flange) x N(f) Adapter |
| LIEDER DEVELOPMENT |
LDT-137 |
CPR137 Low Power Termination, 2 watts maximum, 1.05 VSWR |
| M ITEC |
M1394-01 |
CMR137 Directional Coupler, 30 dB coupling, N(f) coupled port, 15 inches length |
| M2 GLOBAL |
089-080442(a) |
CPRG137 to CMR137 Flange Adapter, brass, 1.75 in. length |
| MAURY MICROWAVE |
C213D2 |
WR2137 x N(f) Adapter, 1.05 VSWR |
| MAURY MICROWAVE |
C213K |
CMR137 x N(f) Adapter |
| MAURY MICROWAVE |
C229A |
WR137/CMR137 x APC7 End Launch Adapter, 1.25 VSWR |
| MAURY MICROWAVE |
C230K1 |
WR137 x 3.5mm male NMD End Launch Adapter |
| MDL |
137PS26-1E-CPR |
CPR137 Variable Phase Shifter, 0-360 degrees, 5.4-5.9 GHz, vernier drive |
| MICROTECH |
MSPS137GGS2A |
CPR137 Jacketed Flexible Section, 2 inches length,aluminum, grooved flanges *NEW* |
| MICROTECH |
MTPS-137-ZZN-30B |
WR137 Flexible / Twistable Jacketed Waveguide, 30 inches length |
| MICROWAVE ASSOC. |
7K8Z6 |
CMR137 Isoadapter, 20 dB, 5.6-7.5 GHz, SMA(m) input/ wg output |
| MICROWAVE ASSOC. |
I-1395L |
CMR137 Isolator, 20 dB, 5.9-6.5 GHz, 10 Watts maximum |
| MICROWAVE ASSOC. |
J7911 |
WR137/CMR137 Circulator, 20 dB isolation, 5.8-7.7 GHz |
| MICROWAVE ASSOC. |
MA-89A |
WR137 x N(f) Adapter |
| MICROWAVE ASSOC. |
MA-909N |
CMR137 x N(f) Adapter |
| MICROWAVE ASSOC. |
MC9264 |
CMR137 Isolator, 25 dB, 5.9-6.5 GHz, 10 Watts maximum |
| MICROWAVE RESEARCH |
J40-NAL |
CMR137 x N(f) Adapter |
| MITEC |
CPR137 twist |
CPR137 90 degree Twist Section, 3 inches length, grooved flanges |
| MITEC |
M0926-05-04 |
CMR137 x N(f) Adapter |
| MITEC |
M1394-1 |
CMR137 Short Body Directional Coupler, 30 dB coupling, directivity 30 dB, 15 in. length |
| MITEC |
MC1700-E-90 |
CMR137 90 degree Mitre E-Plane Bend |
| MITEC |
MC1700-H-90 |
CMR137 90 degree H-Plane Mitre Bend |
| NARDA |
1012 |
WR137 4-Port Crossguide Coupler, 20 dB coupling |
| NARDA |
1082 |
WR137 Sidewall Directional Coupler, 40 dB coupling, directivity 30 dB |
| NARDA |
322 |
WR137 High Power Load, 750 Watts average power |
| NARDA |
612A |
WR137 x N(f) Adapter |
| NARDA |
732 |
WR137 Variable Attenuator, 0-20 dB, vernier dial |
| NEICO MICROWAVE |
21821-1 |
Half-Height WR137 x SMA(f) Adapter |
| OMEGA LABS |
106X11 |
CMR137 x N(f) Adapter |
| OMEGA LABS |
296X5 |
WR137 Sidewall Directional Coupler, 50 dB, SMA-f coupled port |
| OMEGA LABS |
706 |
WR137 Low Power Termination |
| PRD |
121A |
WR137 Termination, 1.015 VSWR, 1 Watt average power |
| PRD |
177-B |
WR137 Variable Attenuator,arbitrary dial, 0-40 dB |
| PRD |
588-A |
WR137 Direct Reading Frequency Meter |
| QUASAR MICROWAVE |
QPS-14SQT08112BM35 |
WR137 x CMR137 Flange Adapter, 1.6 inch length |
| RCA |
478191-1 |
CMR137 Level Set Attenuator, 0-20 dB, uncalibrated drive, 6 in. |
| ROCKWELL |
341-10046P5 |
CMR137 Termination, 5 Watts |
| SECTOR MICROWAVE |
SM3M-AF-6A |
CMR137 DPDT Transfer Switch, manual or motor operation, 28V |
| SPECIALTY MICROWAVE |
A137N-2 |
CPR137 (grooved flange) x N(f) Adapter |
| SPECIALTY MICROWAVE |
DL137-7072 |
CPR137 (grooved flange) High Power Load, 500 Watts average/ 460 kW peak |
| SPERRY |
213 |
WR137 Medium Power Load, 200 watts average power |
| SPERRY |
22G1 |
WR137 Slide Screw Tuner, vernier read |
| SPERRY MICRLINE |
214 |
WR137 Low Power Termination, 2 Watts, 1.05 VSWR |
| STAR MICROWAVE |
5241 |
CMR137 x N(f) Adapter |
| STRUTHERS ELEC. |
NU174A-60 |
CPR137 Directional Coupler, 60 dB coupling, N(f) coupled port |
| SYLVANIA |
FD-502 |
WR137 Isolator, 20 dB, 5.85-8.20 GHz |
| SYSTRON DONNER |
DBJ-642-20 |
WR137 Crossguide Dual Dir. Coupler, 20 dB, N(f) coupled ports |
| SYSTRON DONNER |
DBJ-675-30 |
WR137 Directional Coupler, 30 dB coupling |
| SYSTRON DONNER |
DBJX-018-2/058-2 |
WR137 to Quarter-Height Waveguide 6" Taper & SMA(f) Adapter |
| SYSTRON-DONNER |
DBJ-272 |
WR137 45 degree Twist Section, 10 inches length |
| UMT |
V306E02A4 |
CMR137 90 degree E-Plane Mitre Bend, 1.3 inch bend radius, aluminum *NEW* |
| UNIQUE BROADBAND SYSTEMS |
121-137-N-F-CMR-T2 |
CMR137 x N(f) Adapter, brass *NEW* |
| VARIAN |
L137NW2 |
WR137 High Power Load, 300 Watts average power |
| WAVEGUIDE ENGINEERING |
CMR137 twist |
CMR137 90 degree Twist Section, 3 inches length, brass |
| WAVELINE |
401-APC7-CPRF |
CPR137 x APC7 Adapter |
| WAVELINE |
401-NF-CMR |
CMR137 x N(f) Adapter |
| WAVELINE |
401-WLM |
WR137 x SMA(f) Adapter |
| WAVELINE |
40975-13 |
CMR137 Termination, 5 Watts, 1.15 VSWR, 2.5 inches length |
| WAVELINE |
412DR |
WR137 Direct Reading Level Set Attenuator, 0-40 dB |
| WAVELINE |
417 |
WR137 Crystal Detector, negative polarity |
| WAVELINE |
454 |
WR137 Low Power Termination, 4 Watts average power, 1.02 VSWR |
| WAVELINE |
467 |
WR137 Pressurization Section, no meter provided |
| WAVELINE |
470-30 |
WR137 3-Port Crossguide Coupler, 30 dB coupling |
| WAVELINE |
473-20 |
WR137 Ultra-Flat Directional Coupler, 20 dB coupling |
| WAVELINE |
474-03 |
WR137 Directional Coupler, 3 dB coupling |
| WAVELINE |
474-40 |
WR137 Directional Coupler, 40 dB coupling |
| WAVELINE |
480 |
WR137 Waveguide Shutter, 3-1/2 inches length |
| WAVELINE |
483 |
WR137 Slide Screw Tuner |
| WAVELINE |
499 |
WR137 Standard Gain Horn, 15 dBi gain mid-band |
| WAVELINE |
71233 |
WR137 (choke flange) x WR62 (cover flange) Taper Section, 8 inches length, brass |
| WAVETRONICS |
1705-04 |
CMR137 x SMA(f) Adapter |
| WESTERN ELECTRIC |
2A-002 |
CMR137 x N(f) Adapter |
| WESTERN ELECTRIC |
640-2977-076 |
CMR137 x CPR137 (flat) Flange Adapter, brass, 2 inches length |
| WESTERN ELECTRIC |
695-5960 |
CMR137 x SMA(f) Adapter |
| WESTERN ELECTRIC |
720-000-022 |
CPR137 x CMR137 Flange Adapter, 2 inches length, brass |
| WESTERN ELECTRIC |
CMR137 term |
CMR137 Termination, 5 Watts, 1.10 VSWR, 3.125 inches length, brass |
