|
3 DBM |
10182292-1 |
CPR90 Level Set Attenuator, 0-25 dB, uncalibrated
drive |
|
AERTECH |
W812BR |
WR90 Tunnel Diode Detector, positive polarity,
8.2-12.4 GHz |
|
AIRTRON |
453324 |
WR90 Circulator, 20 dB, 9.5-10.5 GHz, choke flanges |
|
AIRTRON |
BT216-360 |
WR90 Jacketed Flexible Waveguide Section, 36 inches
length |
|
AMERICON |
2000-6254-00 |
WR90 x SMA(f) Adapter |
|
ANDREW |
59210A-90 |
WR90 x N(f) Adapter |
|
APOLLO MICROWAVE |
10605 |
WR75 Load, 75 Watta average |
|
ARRA |
90-463 |
WR90 x APC7 Adapter |
|
ARRA |
AW1829B |
CPR90 Directional Coupler, 10 dB coupling, N(f)
coupled arm |
|
ARRA |
CPR90-460M |
CPR90 x N(m) Adapter |
|
ARRA |
X600-20 |
WR90 4-Port Crossguide Coupler, 20 dB |
|
ARRA |
X820 |
WR90 Standard Gain Horn, 16 dBi gain mid-band |
|
BENDIX |
WXA-007 |
WR90 Loop Coupler, 30 dB coupling to SMA(f), 1 inch
insertion |
|
CASCADE RESEARCH |
HF-8089 |
WR90 Isolator, 20 dB, 8.2-12.4 GHz, 10 Watts maximum |
|
CASCADE RESEARCH |
X-12-25 |
WR90 Isolator, 40 dB, 8.2-12.4 GHz, 10 Watts maximum |
|
CMT |
MPT90-1A |
WR90 Medium Power Load, 250 Watts average |
|
CMT |
RA90-SMA-M1A |
WR90 x SMA(m) Adapter |
|
CMT |
RBCC90SMAF20 |
WR90 Directional Coupler, 20 dB coupling, SMA(f)
coupled port |
|
DEMORNAY BONARDI |
DBG-272 |
WR90 45 degree Twist |
|
DEMORNAY BONARDI |
DBG-274-6 |
WR90 90 degree Twist Section, 6 inches length |
|
DEMORNAY BONARDI |
DBG-275-1 |
WR90 Feedthrough Bulkhead with pressure window,
3-3/4 in. length |
|
DEMORNAY BONARDI |
DBG-313 |
WR90 Tunable Detector |
|
DEMORNAY BONARDI |
DBG-520-20 |
WR90 Standard Gain Horn, 20 dBi gain mid-band |
|
DEMORNAY BONARDI |
DBG-650 |
WR90 Magic Tee |
|
DEMORNAY BONARDI |
DBG-710-3 |
WR90 Direct Reading Freq. Meter, transmission type,
0.08% acc. |
|
DEMORNAY BONARDI |
DBG-915-1 |
WR90 Variable Phase Shifter, 0-180 degrees, gage
read |
|
DEMORNAY BONARDI |
DBG-919 |
WR90 Slide Screw Tuner, vernier read drives |
|
DEMORNAY BONARDI |
DBG-X-198 |
WR90 Phase Shifter, 0-360 deg., 10 deg. res., 1 dB
ins. loss |
|
DEMORNAY BONARDI |
DBG-X-487-1 |
WR90 Directional Coupler, 10 dB, 8.8-9.8 GHz, 5-1/4
inch length |
|
DEMORNAY BONARDI |
DBG-X-487-2 |
WR90 Dir. Cplr., 10 dB, 8.8-9.8 GHz, SMA(f)
thru-line output |
|
DEMORNAY BONARDI |
DBG-X-487-3 |
WR90 Dir. Cplr., 10 dB, 8.8-9.8 GHz, SMA(f) coupled
port output |
|
DIAMOND ANTENNA |
3-830 |
WR90 Directional Coupler, 3 dB coupling |
|
DOUGLAS MICROWAVE |
202X |
WR90 300 Watt Load |
|
DOUGLAS MICROWAVE |
P161X |
WR90 Crystal Detector, triple stub tuned |
|
E&M LABS |
X110LIA |
WR90 Isolator, 25 dB, 8.2-12.4 GHz, 10 Watts maximum |
|
E&M LABS |
X185LI |
WR90 Isolator, 40 dB, 9.0-9.8 GHz, 2-3/4 inches
length |
|
E&M LABS |
X63LI |
WR90 Isolator, 40 dB, 9.6-10.6 GHz, 10 Watts maximum |
|
FERROCOM |
9052-SFI |
WR90 Isoadapter, 20 dB, 8.2-12.4 GHz, SMA(f)-in/
WR90 out |
|
FERROCOM |
9052-SFO |
WR90 Isoadapter, 20 dB, 8.2-12.4 GHz, WR90 in/ SMA(f)
out |
|
FERROTEC |
I-409-L |
WR90 Isolator, 30 dB isolation, 10-11 GHz |
|
FXR/MICROLAB |
X155A |
WR90 Direct Reading Variable Attenuator, 0-20 dB, 2
Watt max. |
|
FXR/MICROLAB |
X157A |
WR90 Isolator, 25 dB, 8.2-12.4 GHz, 10 Watts maximum |
|
FXR/MICROLAB |
X164A |
WR90 Precision Direct Reading Attenuator, 0-50 dB |
|
FXR/MICROLAB |
X311S |
WR90 Slide Screw Tuner, vernier read drives |
|
FXR/MICROLAB |
X410B |
WR90 Direct Reading Frequency Meter, 0.08% accuracy |
|
FXR/MICROLAB |
X411A |
WR90 Direct Reading Frequency Meter, 0.08% accuracy |
|
FXR/MICROLAB |
X502A |
WR90 Sliding Load, VSWR <1.01, 1/2 Watt max. |
|
FXR/MICROLAB |
X510D |
WR90 Standard Mismatch, 1.20 VSWR |
|
FXR/MICROLAB |
X510E |
WR90 Standard Mismatch, 1.50 VSWR |
|
FXR/MICROLAB |
X601C |
WR90 x N(f) Adapter |
